Overview:
Spot-type infrared flame detector consists of two infrared sensor and optical filter, with high sensitivity to CO2 emission spectrum (4.4µm), and another

infrared sensor detects the interference of environment light and thermal radiation, with multiple signal processing method on measured result,

combining logic comprehensive judgement from the flame flicker frequency in the fire so as to restrain false alarm to the greatest extent, and to get

optimal fire detection performance. Flame detector possesses early alarming for the fire arising from hydrocarbon or other organic material. 

Flame detector is able to work under industrial environment of high temperature, high humidity, vibration, etc.

Flame detector is capable of remote detection, completing the setting, with help of the remote, for analog test, alarm reset, alarm delay of the fire

alarm function of detectors, and setting for relay output mode contact locking & non-locking work mode.

Flamer detector is capable of field setting for the sensitivity via internal jumper.

Flame detector has gained CCCF certificate and National Anti-explosion certificate, satisfying the requirement of GB15631-2008, GB3836.1-2010 and GB3836.2-2010.

Main technical specification:

Work voltage: 18V-32VDC non-polarity  Detecting angle: 90°
Static current: ≤15mA/24VDC     Alarm current: ≤30mA/24VDC
Fire response time: ≤10S         Alarm lamp: flashing at normal status, and bum steady at alarming status.

Spectrum response wavelength: 4.4µm 3.8µm  Ambient humidity: 5-95﹪RH without condensation
Ambient temperature: -40℃～+70℃  Outlet thread: 3-G3/4
Explosion-proof sign: ExdIICT6Gb      Protection level: IP66
Shell material: cast aluminum; stainless steel     Weight: 1.7kg (cast aluminum) 3.2kg (stainless steel)

Detection range: I grade 25m (825px×825px×125px n-heptane fire)

Output mode: RS485 MODBUS protocol, alarm relay contact output, fault relay contact output, contact capacity: 2A/30VDC, 4-20mA (fault: 0-1mA, normal: 4mA±5%, alarm: 12mA±5%)

Features:

Dual wavelength infrared + frequency multiple judgement.
Sensitivity can be set at site.

Electromagnetic radiation immunity.

Capable of infrared remote test.

Three output modes: RS485, relay contact, 4-20mA.

Patented and industrial design

Three-port inlet wire
Equipped with light shield.

Dust-proof, explosion-proof, anti-corrosion and rainproof design, and able to work outdoor without rainproof cover.

316 SS material for the shell is possible if the customer requires.

Installation support with special design is applicable to different environment.

Application place:  

This detector is applicable to the place of smokeless liquid & gas fire, open fire with smoke, and explosion.

Painting workshop, aircraft factory, shipyard, natural gas exploration & production enterprise and pharmaceutical factory.

Chemicals: production, storage and transportation.

Paint: production, storage and transportation.

Petrochemicals: production, storage and transportation.

Power plant: pump area, machine room and unattended area.

Printing: solvent treatment, flattening and drying process.

Warehouse: storage of flammables.

This product suitable for indoor and outdoor service.